document number: 26017 for technical questions contact; dc-film@vishay.com www.vishay.com revision: 23-jun-05 1 mkp 1837 vishay roederstein metallized polypropylene film capacitor related document: iec 60384-16 dimensions in millimeters main applications oscillator, timing and lc/rc filter circuits, high frequency coupling/decoupling, sample and hold circuits. marking manufacturer's logo/type/c-va lue/rated voltage/tolerance/ date of manufacture dielectric polypropylene film electrodes vacuum deposited aluminum coating flame retardant plastic case (ul-class 94 v-0), blue, epoxy resin sealed construction extended metallized film (refer to general information) leads tinned wire iec test classification 55/100/56, according to iec 60068 operating temperature range - 55c to + 100c capacitance range 0.01f to 0.1f capacitance drift up to + 40c, < 0.5% for a period of two years features product is completely lead (pb)-free product is rohs-compliant capacitance tolerances 10% (k), 5% (j), 2.5% (h), 1% (f) rated voltages (u r ) 160 vdc permissible ac voltages (rms) up to 60hz 100 vac test voltage (electrode/electrode) 1.6 x u r for 2 s insulation resistance measured at 100 v dc after one minute 100,000 m ? minimum value temperature coefficient - 250c x 10 -6 /c (typical value) maximum pulse rise time dv/dt = 390 v/s if the maximum pulse voltage is less than the rated voltage, higher dv/dt values can be permitted. derating for dc and ac.category voltage u c at + 85c: u c = 1.0 u r at + 100c: u c = 0.7 u r self inductance ~ 6 nh measured with 2mm long leads pull test on leads 30 n in direction of leads according to iec 60068-2-21 dielectric absorption 0.05% (typical value) acc. to iec 60384-1 reliability operational life > 300,000 h failure rate < 5 fit (40c and 0.5 x u r ) for further details, please refer to the general information available at www. vishay.com/doc?26033 . l max. h max. 0.6 6.0 - 1 5.0 0.4 w max. marking 0.4 ? 0.5 dissipation factor tan measured at c 0.1f 1khz 0.4 x 10 -3 10khz 0.6 x 10 -3 100khz 4 x 10 -3 maximum values e3 rohs compliant
www.vishay.com for technical questi ons contact; dc-film@vishay.com document number: 26017 2 revision: 23-jun-05 mkp 1837 vishay roederstein metallized polypropylene film capacitor related docum ent: iec 60384-16 further c-values upon request recommended packaging capacitance capacitance code voltage code 16 160 vdc/100 vac wh l 0.01f - 310 5.5 7.0 7.5 0.015f - 315 5.5 7.0 7.5 0.022f - 322 5.5 7.0 7.5 0.033f - 333 7.5 9.0 7.5 0.047f - 347 7.5 9.0 7.5 0.068f - 368 7.5 9.0 7.5 0.1f - 410 9.0 11.0 7.5 letter code type of pac kaging height (h) (mm) reel diameter (mm) ordering code examples pcm 5 d ammo 16.5 s* mkp 1837-322-162-d x g ammo 18.5 s* mkp 1837-322-162-g x f reel 16.5 350 mkp 1837-322-162-f x w reel 18.5 350 mkp 1837-322-162-w x ? bulk ? ? mkp 1837-322-162 x 0.01 0.022 0.047 0.1 permissible ac volta g e versus frequency 10 2 10 1 10 0 10 -1 10 -2 160 vdc 10 3 10 4 10 5 10 6 10 7 capacitance in f f [hz] vrms 0.022 f 0.01 f 0.047 f 0.1 f impedance versus frequency z = f(f) (lead len g th 2.0mm) f [mhz] 10 1 10 0 10 -1 10 -2 10 -3 0.01 0.05 0.1 0.5 1.0 5.0 10 50 100 f z [ ? ]
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
